OVERVIEW
This American Thunder® Crossmember-Back exhaust system is custom designed for the 1964-1966 Ford Mustang and is perfect for the person looking for a complete 2.50-inch dual exhaust system with a moderately aggressive exterior tone, and a moderate interior sound. With easy fit in mind, these 16-gauge aluminized steel systems feature all mandrel-bent tubing, an H-pipe to equalize the exhaust pressures and a pair of specially selected 40 Series Delta Flow performance mufflers for a deep powerful sound. The mandrel-bent 2.50-inch tailpipes tuck up out of the way for maximum clearance and the last few feet is all polished stainless steel for a show car look. Like all Flowmaster® systems, benefits include improved throttle response, power, and mileage. Designed for an easy fit, these systems include all necessary parts, hardware and instructions for an easy installation. The system is covered by our 3-year Limited Warranty. Connects to existing header collector reducer cones or manifold downpipes(not included.) If you prefer a full stainless steel system with a Lifetime Limited Warranty, check out exhaust system #817273. Notes: For non GT and hardtop models.
Features:
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Extra Long Polished Stainless Steel Tips
- 40 Series Delta Flow Performance Mufflers
- Over 35+years of Flowmaster Quality
- Deep Powerful Exhaust Tone
- H-pipe Crossover Tube
- Crossmember-back System
SPECS
| Brand | Flowmaster |
|---|---|
| California Proposition 65 | Yes |
| CARB (California) Compliant | Yes |
| Catalytic Converter Included | No |
| Catalytic Converter Quantity | 0 |
| Category | Exhaust |
| Clamping Type | U-Bolt |
| Clamps Included | Yes |
| Drive | 2WD |
| Emission Code | 5 |
| Exhaust Series | American Thunder |
| Exhaust Tip Connection | Welded |
| Exhaust Tip Cut | Angled |
| Exhaust Tip Diameter | 2.50 IN |
| Exhaust Tip Edge | Slash Cut |
| Exhaust Tip Finish | Polished |
| Exhaust Tip Intercooled | No |
| Exhaust Tip Length | 29.125 IN |
| Exhaust Tip Material | 304 Stainless Steel |
| Exhaust Tip Quantity | 2 |
| Exhaust Tip Resonated | No |
| Exhaust Tip Shape | Round |
| Exit Style | Dual Out Rear |
| Finish | Aluminized |
| Gasket Or Seal Included | No |
| Grade Type | Performance |
| Hangers Included | Yes |
| Heat Shield Included | No |
| Inlet Diameter | 2.50 IN |
| Inlet Type | Weld-On |
| Main Piping Diameter | 2.50 IN |
| Mounting Bracket Included | Yes |
| Muffler (Left) Body Height | 4.00 IN |
| Muffler (Left) Body Length | 13.00 IN |
| Muffler (Left) Body Width | 9.75 IN |
| Muffler (Left) Type | Chambered |
| Muffler (Right) Body Height | 4.00 IN |
| Muffler (Right) Body Length | 13.00 IN |
| Muffler (Right) Body Width | 9.75 IN |
| Muffler (Right) Type | Chambered |
| Muffler Body Height | 4.00 IN |
| Muffler Body Length | 13.00 IN |
| Muffler Body Material | Aluminized Steel |
| Muffler Body Shape | Oval |
| Muffler Body Width | 9.75 IN |
| Muffler Finish | Black High-Temperature Paint Finish |
| Muffler Flanged Inlet | No |
| Muffler Flanged Outlet | No |
| Muffler Included | Yes |
| Muffler Inlet Connection | Slip-Fit |
| Muffler Inlet Inside Diameter | 2.50 IN |
| Muffler Inlet Outside Diameter | 2.63 IN |
| Muffler Outlet Connection | Slip-Fit |
| Muffler Outlet Quantity | 1 |
| Muffler Part Number | 942541 |
| Muffler Quantity | 2 |
| Muffler Series | 40 Series Delta Flow |
| Muffler Type | Chambered |
| Part Type | Exhaust System |
| Pipe Color | Silver |
| Pipe Material | Aluminized Steel |
| Product Type | Exhaust System |
| Sound Level | Aggressive / Moderate |
| Spring Bolt Kit Included | No |
| Sub Category | Exhaust and Tail Pipes |
| Tail Pipe Outlet Outside Diameter | 2.50 IN |
| Tail Pipe Quantity | 2 |
| Dual | |
| Tail Pipe Tapered Outlet | No |
| Type | Crossmember-back |
| Valve Included | No |
| Valve Type | Not Applicable |
| UPC | 700042016594 |
| California Proposition 65 Chemical Name | Chromium (hexavalent compounds) |
| Nickel (Metallic) | |
| Part Number | 17273 |
